When pulling the steel coil, we must ensure the stability of the steel coil. The following is a summary of the experience of a steel coil master. Let us look at how the old driver fixes the stainless steel coil and the
weathering steel coil. The non-slip mat on the bottom of the truck is covered with wooden boards. Laying wooden boards or thick non-slip mats on the bottom of the car can increase the friction between the steel coil and the bottom of the vehicle and reduce the possibility of the steel coil sliding. Use the sleeper to secure the steel coil correctly. Choose a sleeper or steel frame to secure the steel coil to reduce the possibility of slipping while driving. The two steel coils are fixed with enough mats to ensure the stability of the coil. At the same time, before you get out of the car, prepare enough triangle wood for the occasional need.
Bundle the stainless steel coil and the weathering steel coil. After the steel coil is installed, it is necessary to shake the rope with a hand hoist, which is the most important method to prevent the steel coil from moving. Check more along the way. During the driving process, it is necessary to check more to prevent the wire rope of the fixed steel coil from loosening. When transporting at high speed, every service area needs to be inspected and the wire rope is tightened once. When running the national road, it is best to check every 40 kilometers to tighten the wire rope.
